At the time of the photo, this material was still wet and showed this striking green color. When it dries however, it becomes a pale green and doesn't contrast as well with the surrounding rock.
Monday, June 10, 2013
Processed to 4886 feet, flaky green secondary mineralization
Today we boxed rock core to a depth of 4886 ft, 170 ft deeper than two days ago. We saw one intrusion that was only a couple feet thick, and overall less secondary minerals than we've become used to seeing. However, one fracture in particular showed quite a deposit (photo shows about eight inches from top to bottom):
Saturday, June 8, 2013
Processed to 4716 feet, logged to 2322.6 feet
Today we processed 80 more feet of rock core, to a depth of 4716 ft. The rock continues to hold together extremely well, and the secondary minerals aren't causing as many problems with the drilling as before. We also made significant progress logging this afternoon, interpreting rock units to a depth of 2322.6 ft.
Friday, June 7, 2013
Processed to 4636 feet, elongate black olivine and more secondary mineralizations in vesicles
Today we boxed rock core to a depth of 4636.0 ft, 150.5 ft deeper than two days ago. The rock continues to hold together extremely well, making our job a bit easier. Here are a couple images of the features we've been seeing lately in the core:

Both images are of the same rock, the one on the left is core that has been dried while the one on the right is still wet. The greenish hue of many of the secondary vesicle fillings is more evident in the wet core, while the elongate, black olivine is easier to see in the dry rock. Note that the green material is concentrated toward the bottom of the vesicles, and it grades upward to white. We have even seen layers of fill in some vesicles, with a sharp horizon mid-vesicle where the secondary mineralization changes from green to white material. As for the elongate black olivine, we've been seeing extensive amounts of it throughout many units, so it isn't correlated with rapid cooling near unit contacts like the elongate olivine observed shallower in the hole. I suspect that this olivine is black from the low-temperature alteration that is filling the vesicles, rather than the typical baking that can turn olivine black.

Both images are of the same rock, the one on the left is core that has been dried while the one on the right is still wet. The greenish hue of many of the secondary vesicle fillings is more evident in the wet core, while the elongate, black olivine is easier to see in the dry rock. Note that the green material is concentrated toward the bottom of the vesicles, and it grades upward to white. We have even seen layers of fill in some vesicles, with a sharp horizon mid-vesicle where the secondary mineralization changes from green to white material. As for the elongate black olivine, we've been seeing extensive amounts of it throughout many units, so it isn't correlated with rapid cooling near unit contacts like the elongate olivine observed shallower in the hole. I suspect that this olivine is black from the low-temperature alteration that is filling the vesicles, rather than the typical baking that can turn olivine black.
Wednesday, June 5, 2013
Processed to 4485.5 feet, a closeup of phillipsite
Today we boxed rock core to a depth of 4485.5 ft, 89.5 ft deeper than yesterday. There was one intrusion among the units we processed, and lots of vesicles filled partially or entirely with secondary minerals. Below is an example of a common zeolite mineral we've been seeing lining vesicles in the core, it's white and called phillipsite:
This image is only about one inch from top to bottom, and the phillipsite looks like small spheres lining the vesicles. In fact, phillipsite does not make spheres at all, but rather many thin fibers grow radially outward from a central nucleation point. This gives the impression of a sphere unless you use magnification to view the mineral or find a large enough sample to see the fibers with the naked eye. Phillipsite and the other zeolites we're currently seeing in the core all incorporate water into their structure, indicating chemical interaction between the rock and groundwater caused the formation of these minerals.
Tuesday, June 4, 2013
Processed to 4396 feet, slow drilling rock
Today we boxed rock core to a depth of 4396 ft, 79 ft deeper than yesterday. Some of the lava units that we've been seeing lately are particularly rich in secondary zeolite minerals and smectite clays. At least one of these secondary alteration products has a soapy, slippery consistency that is making it difficult for the drill bit to bite into and cut the rock. Drilling units rich in this material can take two to three times as long as those without. Here is a picture of a typical one of these units:
Note that the unit is also rich in olivine (brown from alteration, with a bit of green unaltered olivine visible in the center of some grains if you click on the photo and view the larger version). The core is quite unfractured, implying that the secondary vesicle fill may actually be adding strength and coherency to the rock. Not all the lava units look like this, but these type of units are encountered nearly every drilling shift at some point.
Note that the unit is also rich in olivine (brown from alteration, with a bit of green unaltered olivine visible in the center of some grains if you click on the photo and view the larger version). The core is quite unfractured, implying that the secondary vesicle fill may actually be adding strength and coherency to the rock. Not all the lava units look like this, but these type of units are encountered nearly every drilling shift at some point.
Monday, June 3, 2013
Processed to 4317 feet
Just a quick text update today to mention that we boxed rock core to a depth of 4317 ft, 101 ft deeper than yesterday. We were able to finish that just after lunch, and logged core boxes for the rest of the afternoon. Tomorrow I promise to post a picture of some of the interesting rock we've been seeing.
Sunday, June 2, 2013
Processed to 4216 feet, least fractured core of the project
Today we boxed rock core to a depth of 4216 ft, 250 ft deeper than the last blog post. I haven't been able to update the blog until today, but we've continued to process and log core over the past few days. I have some interesting photos of the rock to share, here are a couple taken earlier today:

Above are the core trays delivered late this morning, which are some of the least fractured runs of the entire project. The third tray from the left contains an unbroken length of core that our 6'-tall manager stood next to for scale. Stay tuned for further photo updates that show these rocks in greater detail.

Above are the core trays delivered late this morning, which are some of the least fractured runs of the entire project. The third tray from the left contains an unbroken length of core that our 6'-tall manager stood next to for scale. Stay tuned for further photo updates that show these rocks in greater detail.
Subscribe to:
Posts (Atom)



