Wednesday, April 10, 2013

Over 2000 feet!

Today we processed core below another milestone, to a depth of 2000.1 ft.  In addition, the core that was delivered at the end of the day was at least another 40 ft of rock that will await processing until tomorrow morning.
Here is a photo of some of the core processing in action.  Eric is drying the rock core with a heat gun so he can write a foot marker on it with permanent marker, while Katie is in the background rinsing drilling mud off the next run of core.  The white rectangle on the left side of the photo is the open cover of a core box that awaits insertion of the processed rock. 

Tuesday, April 9, 2013

Over 1900 feet

Today we processed rock core to 1898 ft, and received more at the end of the day from depths well over 1900 ft.  We had a few hours of time to log boxes as well, we have logged to about 600 ft so far. 
The photo above was taken at the drill site, thanks again to Dr. Nicole Lautze for pictures of the recent activity up there!  In the picture, Principal Investigator of this project Don Thomas is loading up the trailer with trays of newly drilled rock core for transport to UH Hilo.  There are also two pallets of core boxes in the truck and trailer, we have limited space on campus and keep most of the project supplies up at PTA until we need them.     


Monday, April 8, 2013

Thank You to our visitors

My apologies for the lack of updates lately, things have been extremely busy here at the project.  Not only have we continued to get lots of rock core (now processed to a depth of 1848 ft), but today we also hosted some expert guest volcanologists.  Researchers from the Hawaii Volcano Observatory and the University of Hawaii at Manoa came to look at and help us interpret the rock.
 
Dr. Don Swanson was able to examine the finely bedded material that I had identified earlier on this blog as ash, and determine that it was actually a windblown sand deposit.  The characteristics of that sand were much like what he has seen in the field from sand dunes at Kilauea volcano.

Additionally, volcanologists Frank Trusdell and Dr. Nicole Lautze also provided valuable insight into the complex history of glaciation on Mauna Kea and the characteristics of different types of explosive fall deposits that we have sampled during this drilling project.  I would like to extend a sincere mahalo to all these visitors for their help and support, we now have a much better understanding of the complexities shown in the rocks we've recovered.  We look forward to your continued involvement in this project!  

Saturday, April 6, 2013

Slickensides vs. Slickenfibres

Here are a couple images of a feature we've been seeing on fracture surfaces lately.  The striations on the photos below look like slickensides.
Slickensides are striations on rock, created by the friction between rocks when they slide past each other along a fault plane.  The slickensides shown here are probably not part of a major fault, but they may be part of small regions within a larger fault zone where rocks under stress slide against each other.  We have seen more than a handful of slickensides within the past few days, these two are the most photogenic.
It should be noted that these slickensides may be made up of secondary minerals rather than the original rock itself.  Such minerals are called slickenfibres, and they commonly form along fault surfaces in areas where the rocks slowly creep past each other along a fault, instead of sliding suddenly.  In these photographed examples the striated surfaces look and feel much different than the surrounding rock, so we might be seeing slickenfibres rather than slickensides.  Either way, they indicate at least a small amount of motion among fault surfaces within this borehole.

Drilling Update: We processed core to a depth of 1768 ft today.

Friday, April 5, 2013

Over 1600 feet, and another interesting intrusion

Today we processed rock core to over 1600 ft depth, mostly pahoehoe flows.  We didn't see any intrusive rock today, but yesterday we saw an intrusion with such interesting contacts that I decided to upload photos of them today:
The intrusion itself makes up most of the rock core piece shown in this photo, the more vesicular rock along the bottom of the image is a pahoehoe flow.  Note the irregular shape of the intrusive contact, particularly in the lower right corner where it surrounds a thin bit of pahoehoe lava.  Additionally, on the left side of the photo there is a piece of pahoehoe that was completely surrounded and separated from the rock it was part of before, a typical intrusive "capture" of the invaded rock.  As a side note, the darker areas of rock are mostly surface water that we weren't able to remove completely before taking the photo.  The edges of intrusions can also be dark even when dry though, as a result of rapid cooling to glass or extremely fine-grained material.  The other contact from the same intrusion illustrates this point:
The darker rock close to the contact is called a "chilled margin," and is often the first part of an intrusion to cool to solid rock.  The rest of the intrusion cools from its sides toward its center after magma has stopped flowing through (note elongate vesicles on the far right of the photo that indicate magma flow). 

Thursday, April 4, 2013

Fracture Fill

Today we processed rock core to a depth of 1538 ft.  Over the last couple days, the drillers have had to pull up some of the drill string when the torque gauge on the rig indicates that loose material is accumulating on the outside of the pipe.  When they then advance back down the hole, they drill through the rubble that has fallen in and then the entire pipe turns more smoothly as the drill bit advances downward.  This is called a "wiper trip," because the drill string clears debris to the bottom of the hole somewhat like how a windshield wiper clears water droplets off a windshield. 
Above is a photo of the "fracture fill" that I mentioned yesterday.  We've been seeing quite a bit of this material, the fill itself is the brown band in the middle of the photo.  If you look closely, the fill appears muddy and a bit smeared.  This material can at times be quite solid because it has been compacted by all the weight on top of it, but it is sediment rather than solid rock.  It seems that fine-grained silt and mud has been washed into some fractures by groundwater and then compacted in place.  There are still plenty of fractures that have no fill in them, but this fill can help hold otherwise broken rock core pieces together.  As we progress deeper, it will be interesting to see if this fracture fill material persists and if it will help hold together the core even more. 

Wednesday, April 3, 2013

1485 feet

It was another full day of processing core for us, down to 1485 ft.  Much of the core was highly fractured, and there was even some fine-grained sediment in some of the runs that we looked at.  The sediment occurred in two different styles: 1) unconsolidated and mixed with other, larger rock over a distinct depth interval within a run, or 2) strongly compacted into a fracture and giving the appearance of solid rock.  I'll try and get a good photo of the latter style (fracture fill) to post on the blog tomorrow.